Thursday 11th March 2021

Thursday, 11 March 2021 00:00 Paul Hutchinson J27 Blog
Print

Since the last report there has been one working party on the J27 (Chris H, Neal W, James P and Robson H)

The work undertaken was as follows:

  1. Big end brasses milled to reduce clearance.
  2. LH valve rings cleaned.
  3. Both valves oiled and stored.
  4. The crosshead (collected by Mike from M.Machine last Friday) inspected and little end pin lapped in to new bush.
  5. Drawbar rear section dye pen tested (ok).
  6. Front buffer beam dismantled.
Last Updated on Friday, 19 March 2021 21:04